MAF Housing Size Calculator
Estimate peak airflow at your target RPM and the MAF housing size needed to keep the sensor off its ceiling.
Engine
Relative to manifold pressure & temp
Post-blower / intercooler charge temp
MAF Sensor
= 3.15 in
Highest g/s the MAF reports in current housing
From logs, at the boost/temp entered above
Results
Recommended Housing
—
—
Airflow @ Target RPM
—
—
Required Capacity (+margin)
—
g/s
Minimum Housing ID
—
—
Current Housing Maxes At
—
RPM
New Housing Maxes At
—
RPM
Actual Headroom
—
at target RPM
MAF Scaling Change
—
(D₂/D₁)² area ratio
—
Airflow across the rev range using the inputs from the MAF Sizing tab.
| RPM | Airflow (g/s) | lb/min | % of Current Ceiling | % of Recommended | Status |
|---|
Capacity of common housing sizes with the same sensor, compared to your target.
| Housing | ID (mm) | Capacity (g/s) | Maxes At (RPM) | Headroom @ Target | Scaling Change | Status |
|---|
Estimates assume the sensor reading scales with housing cross-sectional area (uniform flow across the housing). Real housings vary with sensor insertion depth, screens and inlet shape, so always verify the MAF transfer in logs after fitting. Housing sizes are inner diameters, rounded up to the next ½".