ELATE 1UZ/2UZ/3UZ CAST VVTI NON-INTERCOOLED SUPERCHARGER MANIFOLD

ELATES’s all new V3 1-Piece cast aluminium low mount manifold to suit the popular Toyota / Lexus 4.0L, 4.3L and 4.7L v8 engine platform.

The manifold features an all new 1 piece design with substantially larger runners into the intake ports, 2 x 1/8 NPT ports on the underside of the manifold along with a 3/8 NPT port for the readily available GM style intake air temperature sensors. The units are cast in aluminium, powder coated and machined. There is no intercooler fitted to this manifold however it is able to be upgraded should you want to add an intercooler at a later date.

This manifold has been designed to suit the factory 1UZ VVTI / 3UZ injectors and fuel rails.

**Note** The hard line that connects the fuel rails in front and behind the manifold will need to be swapped out for a flexi AN line due to making contact with the manifold when installed.
**Note** SVT M112 superchargers also need the factory intercooler mount on the underside removed to allow it to mount to our top plates.
**Note** This manifold will not fit on 2UZ  engines with a secondary air pump system located in the valley (typically found on the 2UZ VVTI) without runner extenders, if you are unsure if your vehicle has this please get in touch before ordering.

This kit includes the following items:

• ELATE V3 cast 1-piece manifold.
• Aluminium top plate..
• M8 x 20 countersunk fasteners (for the top plate and manifold body assembly).
• M8 x 40 cap screws (for attaching the manifold to the heads)
• Fuel Rail spacer kit
• Installation instructions.
• Email assistance if required.