ELATE X AEM 2UZ FPR KIT

When supercharging your 2UZ (VVTI or NON-VVTI) one of the limitations in the fuel system will be your factory fuel pressure regulator found on one of the fuel rails. This kit includes all the components needed to replace your factory regulation with a quality rising rate one.

Why would you need this? Adding in a rising rate fuel pressure regulator will give you the ability to increase the rail fuel pressure which will in turn allow you to squeeze a bit more flow out of the factory fuel injectors which is needed when on boost, under load and at higher RPM’s. The factory regulator is also not designed to see positive pressure and will eventually fail which could result in lean conditions and the detonation.

Inclusions:

~ AEM FPR (40-130 PSI)
~ 1/8″ Fuel pressure Gauge
~ ELATE 6AN rail Adapter
~ 6AN 90° push lock hose end x 1
~ 6ORB to 6AN male flare fitting x 2
~ 6ORB port plug x 1
~ 6AN straight push lock hose ends x 3
~ 6AN male EFI fitting (5/16″) x 1
~ 6AN Push lock hose x 1 meter